You may need to enable TLS (Transport Layer Security) in your browser in order to access the iLO web interface. Note: To address the “POODLE” security vulnerability, the iLO security policy has changed and SSLv3 is now disabled. In some cases, this could result in Active Health System download failures or the Embedded User Partition might not be available. Partitions on the NAND device might fail to mount. HP ProLiant Gen8 servers with iLO 4 2.00 or 2.02 might display an incorrectly lit FAN1 Systems Insight Display (SID) LED when no FAN1 is installed. HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report an incorrect value for the temp1 sensor. AMD-based HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report incorrect processor temperatures.
Booting from an SD card with ESXi could fail. A timing issue could cause intermittent Windows Hardware Error Architecture (WHEA) test failures. Improved the reliability of DIMM SPD read/write operations. Added support for TLS v1.1 and TLS v1.2 when using HTTPS URLs with iLO scripted virtual media, firmware update, certificate import, SSH key import, and for HP remote support registration and data collection. Verify updated Firmware ~]# hponcfg | grep Firmwareįirmware Revision = 2.This component provides and installs an updated version of firmware for the iLO 4 Management Processor allowing for continued management support of your Server. ***** Please ignore console messages, if any. ***** iLO 4 reboot in progress (may take more than 60 seconds.) This operation will update the firmware on theįirmware image is 0x1001b1c(16784156) bytesįlashing is underway. (C) Copyright 2002, 2016 Hewlett-Packard Enterprise Development Company, L.P.Ĭurrent iLO 4 firmware version 2.40 Serial number ILO2M270802JMĬP027911.xml reports firmware version 2.50 Update firmware file permission and run it ~]# chmod u+x /tmp/CP027911.scexe Check current Firmware version ~]# hponcfg | grep Firmwareįirmware Revision = 2.40 Device type = iLO 4 Driver name = hpilo 5. Warning: /tmp/hponcfg-4.6.0-0.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID b1275ea3: NOKEY Install hponcfg (if not available) ~]# rpm -ivh /tmp/hponcfg-4.6.0-0.x86_64.rpm Make sure you download the required version from hereĢ. Download HPE iLO firmware files from HPE portal.
0 kommentar(er)
